• Click To Talk
All Products >> IP Testing Equipments >>6.3mm Jet Nozzle

6.3mm Jet Nozzle

Ask Price

Ask For Price

Product Details

Product Name:
Product NO:
Brochure Download: pdf   pdf



SpecificationsVideoYes! I am Intrested

 6.3mm Jet Nozzle

Product information:

The jet nozzle is designed and manufactured in accordance with IEC60529 clause IPX5 and IPX6. It is used for the waterproof test of the electric appliance.

  • Test for second charateristic numeral 5 with the 6.3 mm nozzle
  • The test is made by spraying the enclosure from all practicable directions with a stream of water from a standard test nozzle as shown in figure 6.
  • The conditions to be observed are as follows:
  • Internal diameter of the nozzle:6.3 mm;
  • Delivery rate:12.5 L/min±5%;
  • Water pressure: to be adjusted achieve the specified delivery rate;
  • Core of the substantial stream: circle of approximately 40 mm diameter at 2.5 m distance from nozzle;
  • Test duration per square metre of enclosure surface area likely to be sprayed:1 min;
  • Minimum test duration: 3 min;
  • Distance from nozzle to enclosure surface: between 2.5 m and 3 m.
  • Test for second characteristic numeral 6 with the 12.5 mm nozzle
  • The test is made by spraying the enclosure from all practicable directions with a stream of water from a standard test nozzle as shown in figure 6.
  • The conditions to be observed are as follows:
  • Internal diameter of the nozzle:12.5 mm;
  • Delivery rate: 100 I/min ±5%;
  • Water pressure: to be adjusted to achieve the specified delivery rate
  • Core of the substantial stream: circle of approximately 120 mm diameter at 2.5 m distance from nozzle;
  • Test duration per square metre of enclosure surface area likely to be sprayed: 1 min;
  • Minimum test duration: 3 min;
  • Distance from nozzle to enclosure surface: between 2.5 m and 3 m.

 

Technical parameters:

No. Item IPX5 IPX6
1 Water supply Water flow rate > 12.5L/min±5% clean water without inclusion.

It can be achieved by the stainless steel water tank and pressurized equipment

Water flow rate >100L/min±5% clean water without inclusion.

It can be achieved by the stainless steel water tank and pressurized equipment

2 The nozzle diameter Ф6.3mm Ф12.5mm
3 Water flow 12.5±0.625L/min,Flow meter is adjustable 100±5 L/min,Flow meter is adjustable
4 The distance from jet nozzle to enclosure 2.5~3m 2.5~3m
5 Testing time Not less than 1min/m²(not less than 3 mins) Not less than 1min/m²(not less than 3mins)
6 Pressure gauge 0~0.25MPa 0~0.25MPa
7 Site requirements Dedicated IP waterproof test room whose width is more than 3m,

With good function of inflow and drainage. Wall installation

Dedicated IP waterproof test room whose width is more than 3m,

With good function of inflow and drainage. Wall installation

 

Get a QUICK Quote Now!

We shall reply you within 24 hours

Name

Product Name

Email

Tel

Country

Content